ZyXEL Communications Network Router zyxel User Manual download pdf (Page 131)

Chapter 12 Maintenance

WAP3205 User’s Guide

131

12.10 Sys Op Mode Screen

Use this screen to select how you want to use your WAP3205.

Figure 84 Maintenance > Sys OP Mode

The following table describes the labels in the General screen.

Table 47 Maintenance > Sys OP Mode

Note: If you select the incorrect System Operation Mode you may not be able to

connect to the Internet.

LABEL DESCRIPTION

System Operation Mode

Access Point Select Access Point Mode if your device bridges traffic between clients

on the same network.

• In Access Point mode all Ethernet ports have the same IP address.

• The default IP address of the device on the local network is

192.168.1.2.

Client Mode Select Client Mode if your device needs a wireless client to connect to an

existing access point.

• You cannot configure wireless LAN settings like MAC filtering, QoS,

WDS and scheduling in the client mode.

• The IP address of the device on the local network is the same as the IP

address given to the WAP3205 while in access point mode (default is

192.168.1.2).

Universal

Repeater

Mode

Select Universal Repeater Mode if you want to have wireless clients

associate with the WAP3205 and also want to connect the WAP3205 to an

existing access point.

• In addition to wireless LAN settings between the WAP3205 and wireless

clients, you also need to configure security and wireless settings

between the WAP3205 and another access point.

• WDS is not available when the WAP3205 is in universal repeater mode.

• The IP address of the device on the local network is the same as the IP

address given to the WAP3205 while in access point mode (default is

192.168.1.2).

Apply Click Apply to save your settings.

Reset Click Reset to return your settings to the default (Router)

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 259 260

No comments

ZyXEL Communications Network Router zyxel User Manual Page 131