ZyXEL PLA-4xx Series User Manual download pdf (Page 55)

PLA-4xx Series User’s Guide

APPENDIX A

Product Specifications

The following tables summarize the PLA-4xx’s hardware and firmware features.

Table 11 Hardware Specifications

Dimensions (W x D x H) PLA-400/400 v2/402

112 (L) mm x 106 (D) mm x 28.5 (H) mm

PLA-470

162 (L) mm x 118 (D) mm x 40 (H) mm

Power Input 100 - 240 VAC, 50/60 Hz, 0.12 A

Ethernet Port Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex

mode.

Auto-crossover: Use either crossover or straight-through Ethernet cables.

RESET Pressing this button in for less than 3 seconds resets the device to factory

default settings. Network Name becomes HomePlugAV.

Pressing this button in for more than 10 seconds resets the firmware to the

previous version.

ENCRYPT Pressing this button in for less than 3 seconds begins the connection setup

process.

Pressing this button in for more than 10 seconds resets the network name

to a random value.

Operation Environment Temperature: 0º C ~ 45º C

Humidity: 5% ~ 95% Noncondensing

Storage Environment Temperature: -10º C ~ 70º C

Humidity: 10% ~ 85% Noncondensing

Cabling Type PLA-400/400 v2/402/470

1 x Power Cord

PLA-400/400 v2/402

1 x LAN UTP Category 5 or Better

PLA-402

1 x Coaxial Cable

PLA-470

4 x LAN UTP Category 5 or Better

Network Interface PLA-400/400 v2/401/402/470

1 x 200 Mbps Powerline port compliant with HomePlug AV standard

PLA-400/400 v2/401/402

1 x 10/100M BASE-T Ethernet port with Auto MDI/MDIX

PLA-470

4 x 10/100 M Base-T Ethernet Ports with Auto MDI/MDIX

PLA-402

1 x Coaxial Cable Port

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 69 70

No comments

ZyXEL PLA-4xx Series User Manual Page 55