ZyXEL PLA-491 User Manual download pdf (Page 79)

PLA-4xx Series User’s Guide

APPENDIX A

Product Specifications

The following tables summarize the PLA-4xx’s hardware and firmware features.

Table 17 Hardware Specifications

Dimensions (W x D x H) PLA-400/400 v2/402 v2

112 mm (L) x 106 mm (D) x 28.5 mm (H)

PLA-401/401 v2

97 mm (L) x 45 mm (H) x 70 mm (W)

PLA-470

162 mm (L) x 118 mm (D) x 40 mm (H)

PLA470 v2

162 mm (L) x 118 mm (D) x 35 mm (H)

PLA491

395 mm (W) x 186 mm (D) x 96 mm (H)

Power Input PLA-400/401 v2

100 - 240 VAC, 50/60 Hz, 0.12 A

PLA-400 v2/402 v2

100 - 240 VAC, 50/60 Hz, 0.13 A

PLA401/470/470 v2

100 - 240 VAC, 50/60 Hz, 0.2 A

PLA491

100 - 240 VAC, 50/60 Hz, 10 A (Max.)

Ethernet Port Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex

mode.

Auto-crossover: Use either crossover or straight-through Ethernet cables.

RESET Pressing this button in for less than 3 seconds resets the device to factory

default settings. Network Name becomes HomePlugAV.

Pressing this button in for more than 10 seconds resets the firmware to the

previous version.

ENCRYPT Pressing this button in for less than 3 seconds begins the connection setup

process.

Pressing this button in for more than 10 seconds resets the network name

to a random value.

HomePlug Switch PLA491 only.

Pressing the switch into the Reset position will turn on the powerline

adapter. An amber light indicates the PLA491 is turned on.

Pressing the switch into the Off position will turn off the powerline adapter.

AC Switch PLA491 only.

Pressing the switch into the Reset position will turn on the power outlets on

the powerstrip. An amber light indicates the power outlets are turned on.

Pressing the switch into the Off position will turn off the power outlets on the

powerstrip.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 97 98

Comments to this Manuals

No comments

ZyXEL PLA-491 User Manual Page 79

Comments to this Manuals

Related products and manuals for PowerLine network adapters ZyXEL PLA-491