ZyXEL PLA-491 User Manual download pdf (Page 56)

Chapter 6 Powerline Network Setup Tutorial

PLA-4xx Series User’s Guide

6.1.1 Important Terms

6.1.2 Accessing Your Powerline Adapter

1 Attach the power cord that came in the package to your powerline adapter.

2 Plug the power cord of the powerline adapter you want to add to your network into a

power socket and, if needed, switch the power socket on.

Figure 31 Plug Your Powerline Adapter into a Power Socket

3 Connect the powerline adapter to your computer.

4 Use a LAN or Ethernet cable (shown below) to connect the LAN or Ethernet port on

your adapter to the same kind of port on your computer.

Figure 32 Connect Your Powerline Adapter to a Computer

5 Open the PLA-4xx Series Configuration Utility on your computer. Go to Start > (All)

Programs > ZyXEL PLA-4xx Series Configuration > PLA-4xx Series

Configuration Utility, or click on the icon on your desktop shown below.

Network Name The network name allows a powerline adapter to connect with other

powerline adapters that have the same network name. It provides

security for your powerline network. The network name uses English

letters or numbers, from 8 to 64 characters long, with no spaces

allowed.

DAK Password DAK = Device Access Key.

The DAK Password lets you access the powerline adapter. You can

find the DAK Password on a label on your powerline device.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 97 98

No comments

ZyXEL PLA-491 User Manual Page 56