ZyXEL PLA-400 User Manual download pdf (Page 43)

Chapter 5 The Configuration Utility

PLA-4xx Series User’s Guide

5.3 Configuration Screen

Use the Configuration screen to see which devices are recognized by your powerline

network, to configure your PLA-4xx and to set up a secure powerline network by changing the

powerline network name. This screen opens up when you launch the utility.

" Use the icon to view online help information in each screen of the utility.

Figure 23 Configuration Screen

The following table describes the labels in this screen.

Table 4 Configuration Screen

LABEL DESCRIPTION

Network

Topology

Use this to select which powerline network information is displayed. Different

powerline networks are identified by the Ethernet interface (network card) connected

directly to the PLA-4xx. Typically there is only one connection, however, if your

computer has two network cards and both are connected to a powerline device then

you have two powerline networks.

The fields described below are used to identify the powerline adapters recognized on the powerline

network. The configuration utility automatically updates this information every 10 seconds. Click Scan

to refresh the information in these fields (immediately).

Note: Only devices which share the same network name are displayed in this

table.

Site This field displays

• Local, if it is identifying the powerline adapter directly connected to the computer

running the configuration utility.

• Remote, if it is a powerline adapter in your powerline network but not directly

connected to the computer running the configuration utility.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 89 90

No comments

ZyXEL PLA-400 User Manual Page 43