ZyXEL AMG1202-T10A User Manual download pdf (Page 9)

URATIO

#If you cannot access the Internet and the INTERNET LED is off, make sure

you enter the correct information in the WAN screens.

If you are using a new Internet account, contact your ISP to make sure it is

active.

If you are trying to access the Internet wirelessly, make sure the wireless and

security settings in your wireless client are the same as the settings in the

AMG1202-T10A.

Wireless Setup

To create a wireless network, the AMG1202-T10A and your wireless

computer(s) must all use the same SSID (network name), channel and

security settings.

1. Go to Network > Wireless LAN.

2. Enable wireless LAN, enter a name to identify your wireless network

(such as “My-SSID“) in the SSID field, and select a channel which is

not used by neighboring wireless devices.

3. Select your security mode and configure wireless security settings. In

this example, the AMG1202-T10A uses WPA2-PSK for data

encryption.

If you do not set wireless security, anyone within range could use your AMG1202-

T10A to access your network and the Internet.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

ZyXEL AMG1202-T10A User Manual Page 9