ZyXEL 802.11g User Manual download pdf (Page 15)

P-334WT

WAN IP Address Assignment

Select Get automatically from ISP if

your ISP did not assign you a fixed IP

address.

Select Use fixed IP address to give the

Prestige a fixed, unique IP address. The

fixed IP address should be in the same

subnet as your broadband modem or

router.

Enter a Subnet Mask appropriate to

your network and the Gateway IP

Address of the neighboring device, if

you know it. If you do not, leave the

Gateway IP Address field as 0.0.0.0.

DNS Server Address Assignment

Select From ISP if your ISP dynamically assigns DNS server information (and the Prestige’s WAN IP address). The field to

the right displays the (read-only) DNS server IP address that the ISP assigns. If you chose From ISP, but the Prestige has a

fixed WAN IP address, From ISP changes to None after you click Next. If you chose From ISP for the second or third DNS

server, but the ISP does not provide a second or third IP address, From ISP changes to None after you click Next.

Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right.

If you chose User-Defined, but leave the IP address set to 0.0.0.0, User-Defined changes to None after you click Next. If

you set a second choice to User-Defined, and enter the same IP address, the second User-Defined changes to None after

you click Next.

Select None if you do not want to configure DNS servers. If you do not configure a system DNS server, you must use IP

addresses when configuring VPN, DDNS and the timeserver.

WAN MAC Address

The WAN MAC address field allows users to configure the WAN port's MAC address by either using the factory default or

cloning the MAC address from a computer on your LAN. Select Factory Default to use the factory assigned default MAC

address. Alternatively, select Spoof this Computer's MAC address - IP Address and enter the IP address of the

computer on the LAN whose MAC address you are cloning.

Click Next to continue.

This is the final wizard screen you need to configure. Select the Yes radio button and click Finish to

enable One-Touch Intelligent Security Technology (OTIST).

1 2 ... 10 11 12 13 14 15 16 17 18 19

No comments

ZyXEL 802.11g User Manual Page 15