ZyXEL IES-612-51A User Manual download pdf (Page 199)

Chapter 27 RFC 2684 Routed Mode

IES-612-51A User’s Guide

199

The following table describes the labels in this screen.

27.4 RPVC Arp Proxy Screen

Use this screen to view the Address Resolution Protocol table of IP addresses of CPE devices

using 2684 routed mode and configure how long the device is to store them.

To open this screen, click Advanced Application, 2684 Routed Mode, RPVC ARP Proxy.

Table 60 2684 Routed Domain

LABEL DESCRIPTION

RPVC ARP Proxy Click RPVC ARP Proxy to go to the screen where you can view the Address

Resolution Protocol table of IP addresses of CPE devices using 2684 routed

mode and configure how long the device is to store them (see Section 27.4 on

page 199).

Routed Gateway Click Routed Gateway to go to the screen where you can configure gateway

settings (see Section 27.5 on page 200).

Routed PVC Click Routed PVC to go to the screen where you can configure routed PVC

settings (see Section 27.2 on page 196).

Port Use this drop-down list box to select a port for which you wish to configure

settings.

VPI Type the Virtual Path Identifier for this routed PVC.

VCI Type the Virtual Circuit Identifier for this routed PVC.

IP Enter the subscriber’s CPE LAN IP address in dotted decimal notation.

NetMask The bit number of the subnet mask of the subscriber’s IP address. To find the bit

number, convert the subnet mask to binary and add all of the 1’s together. Take

“255.255.255.0” for example. 255 converts to eight 1’s in binary. There are three

255’s, so add three eights together and you get the bit number (24).

Add Click Add to save your changes to the IES-612-51A’s volatile memory.

The IES-612-51A loses these changes if it is turned off or loses power, so use

the Config Save link on the navigation panel to save your changes to the non-

volatile memory when you are done configuring.

Cancel Click Cancel to start configuring the screen again.

Index This field displays the number of the routed PVC.

Port This field displays the number of the DSL port on which the routed PVC is

configured.

VPI This field displays the Virtual Path Identifier (VPI) The VPI and VCI identify a

channel on this port.

VCI This field displays the Virtual Circuit Identifier (VCI). The VPI and VCI identify a

channel on this port.

IP This field displays the subscriber’s IP address.

NetMask This field displays the bit number of the subnet mask of the subscriber’s LAN IP

address.

Delete Select an entry’s Delete check box and click Delete to remove the entry.

Clicking Delete saves your changes to the IES-612-51A’s volatile memory.

The IES-612-51A loses these changes if it is turned off or loses power, so use

the Config Save link on the navigation panel to save your changes to the non-

volatile memory when you are done configuring.

Cancel Click Cancel to start configuring the screen again.

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 443 444

Comments to this Manuals

No comments

ZyXEL IES-612-51A User Manual Page 199

Comments to this Manuals

Related products and manuals for Network switches ZyXEL IES-612-51A