ZyXEL P-2302HWUDL-P1 User Manual download pdf (Page 9)

P-2302HWUDL-P1 Quick Start Guide

STEP 3: WAN

Select one connection type from the drop-down list box. Check with your ISP to make sure you use the correct

type:

1Ethernet

2 PPP over Ethernet

Note: If you were given Internet access settings, enter them in the following fields. Otherwise leave the

default settings and just click Next.

A Select Ethernet as your WAN connection type.

B Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to C.

Select Use fixed IP address provided by your ISP to give the P-2302HWUDL-P1 a fixed, unique IP address.

Go to B1.

B1 If you select Use fixed IP address provided by your ISP, enter a WAN IP address, WAN IP Subnet Mask

and the neighboring device’s IP address given by your ISP.

If you were given DNS server settings, enter them in the fields. Otherwise leave the default settings and

just click Next.

C Select Factory Default to use the factory assigned default MAC address and click

Next. Then click Apply to

save your changes. The OTIST in Progress screen appears if you enable OTIST in the previous wizard

screen. Wait for the P-2302HWUDL-P1 to finish transferring OTIST settings.

D Click Finish to complete the wizard.

Ethernet Connection

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

ZyXEL P-2302HWUDL-P1 User Manual Page 9