ZyXEL ADSL2+ User Manual download pdf (Page 54)

P-660R-T Series User’s Guide

Chapter 3 Wizard Setup 54

Figure 12 Internet Access Wizard Setup: LAN Configuration

The following table describes the labels in this screen.

Table 9 Internet Access Wizard Setup: LAN Configuration

LABEL DESCRIPTION

LAN IP Address Enter the IP address of your Prestige in dotted decimal notation, for example,

192.168.1.1 (factory default).

Note: If you changed the Prestige's LAN IP address, you must

use the new IP address if you want to access the web

configurator again.

LAN Subnet Mask Enter a subnet mask in dotted decimal notation.

DHCP

DHCP Server From the DHCP Server drop-down list box, select On to allow your Prestige to

assign IP addresses, an IP default gateway and DNS servers to computer

systems that support the DHCP client. Select Off to disable DHCP server.

When DHCP server is used, set the following items:

Client IP Pool Starting

Address

This field specifies the first of the contiguous addresses in the IP address

pool.

Size of Client IP Pool This field specifies the size or count of the IP address pool.

Primary DNS Server Enter the IP addresses of the DNS servers. The DNS servers are passed to

the DHCP clients along with the IP address and the subnet mask.

Secondary DNS Server As above.

Back Click Back to go back to the previous screen.

Finish Click Finish to save the settings and proceed to the next wizard screen.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 301 302

No comments

ZyXEL ADSL2+ User Manual Page 54