ZyXEL PLA-400 User Manual download pdf (Page 53)

Appendix A Product Specifications

PLA-4xx Series User’s Guide

Wall-mounting Instructions

Complete the following steps to hang your PLA-400/402/470 on a wall.

" See Table 9 on page 51 for the size of screws to use and how far apart to place

them.

1 Select a high position on a sturdy wall that is free of obstructions.

2 Drill two holes for the screws. The distance between the centers of the holes is listed in

the product specifications appendix.

1 Be careful to avoid damaging pipes or cables located inside the wall when

drilling holes for the screws.

3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm

between the heads of the screws and the wall.

4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of

the PLA-4xx with the connection cables.

5 Align the holes on the back of the PLA-4xx with the screws on the wall. Hang the PLA-

4xx on the screws.

Figure 36 Wall-mounting Example

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 65 66

No comments

ZyXEL PLA-400 User Manual Page 53