ZyXEL GS-1548 User Manual download pdf (Page 39)

Chapter 3 Hardware Overview

GS-1524/GS-1548 User’s Guide

Figure 15 GS-1548 Rear Panel

3.3.1 Power Connector

Make sure you are using the correct power source as shown on the panel.

To connect the power to the Switch, insert the female end of the power cord into the power

receptacle on the rear panel. Connect the other end of the supplied power cord to a 100~240V

AC, 50/60 Hz power outlet capable of supplying at least 0.9A (G-1524) or 1.4A (GS-1548).

3.4 The RESET Button

Reset the Switch to its factory default configuration via the RESET button. Press the RESET

button for one second and release. The Switch automatically reboots and reloads its factory

default configuration file.

" When you use the RESET button all of your configuration settings will be lost.

Use the default IP address (192.168.1.1) and user name (admin) and

password (1234) to log back into the Switch. It may take up to 2 minutes for

the Switch to restart when you reload the default configuration file.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 169 170

No comments

ZyXEL GS-1548 User Manual Page 39