ZyXEL VDSL2 User Manual download pdf (Page 17)

Chapter 1 VLC Overview

VLC1324G User’s Guide

VDSL2 to ADSL2+ Fallback

The VLC can automatically use ADSL2+ for connections where VDSL2 training fails. This

allows a longer connection distance.

Spectral Mask

PSD (Power Spectral Density) defines the distribution of a VDSL line’s power in the

frequency domain. A PSD mask is a template that specifies the maximum allowable PSD for a

line. The VLC transmitter signal complies with the Power Spectrum Density (PSD) mask

specified in ITU-T G.993.2 and supports masks EU32_D32, EU36_D48, and EU40_D48.

Latency Mode

The VLC supports the latency path function specified in ITU-T G.993.2 and you can manually

configure the payload transfer delay for interleaved transmissions.

Rate Adaption

Rate adaption lets the VLC adjust from the configured transmission rate to the attainable

transmission rate automatically depending on the line quality. The VDSL transmission rate

then stays at the new rate or adjusts if line quality improves or deteriorates.

The rate adaptation conforms to ITU-T G.993.2 and G.997.1 and is manually configurable and

can adjust automatically based on the line quality as determined by the Signal-to-Noise Ratio

(SNR).

Trellis Coding

The VLCuses Trellis coding (as specified in ITU-T G.993.2) to help reduce the noise in VDSL

transmissions.

Impulse Noise Protection (INP)

Short impulses from external sources may cause bursts of errors which could impact

multimedia (ex. voice, video, or picture) quality. The VLC’s VDSL2 supports Impulse Noise

Protection (INP) as defined ITU-T G.993.2. The VLC’s impulse noise protection provides the

ability to correct errors regardless of the number of errors in an errored DMT (Discrete Multi-

Tone) symbol. You can configure the minimum impulse noise protection to provide up to 16

DMT symbols protection.

Loop Diagnostic

The VLC supports the loop diagnostic function specified in ITU-T G.993.2. The test

parameters include quiet line noise, signal-to-noise ratio, loop attenuation, signal attenuation,

signal-to-noise ratio margin, attainable net data rate, and far-end actual aggregate transmit

power. After completing the loop diagnostic function, the VLC displays the test results and

automatically returns to the normal state to be ready for initialization.

System Monitoring

• System status (link status, rates, statistics counters)

• Configurable temperature and voltage monitoring thresholds and alarm reports.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

No comments

ZyXEL VDSL2 User Manual Page 17